Ford C-Max Service Bulletins
240 manufacturer communications on file.
- March 9, 2020•Document ID: 10172972Service Bulletin/Repair InstructionsUNKNOWN OR OTHER; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 48619
- Date Added:
- April 2, 2020
- Manufacturer:
- FORD
SummarySSM 48619 - Various Vehicles - Perimeter Alarm Armed And Original Vehicle Keys Cannot Be Accessed to Enter Vehicle - CAN Protection Strategy Some 2013-2016 Model Year Vehicles may exhibit a concern in which the Perimeter Alarm is active and the original keys cannot be accessed to disable the perimeter alarm. This concern would most often occur when a customer loses keys and the dealership is attempting to program new keys to the vehicle. The Workshop Manual (WSM), Section 419-01A Perimeter Anti-Theft Alarm - System Operation and Component Description has been updated to inform of the Controller Area Network (CAN) Protection Strategy. Follow the procedure outlined to prevent replacement of the Body Control Module (BCM) on CAN Protection Strategy equipped vehicles when original keys are lost and perimeter alarm is active. Refer to the WSM for further detail on the CAN Protection Strategy. Lost keys and replacement of BCM for lost keys is non-warrantable.
Associated Products (151)2020 Ford Ecosport2020 Ford Edge2020 Ford F-1502020 Ford F-2502020 Ford F-3502020 Ford F-4502020 Ford F-5502020 Ford Fusion2020 Ford Mustang2020 Ford Transit2020 Ford Transit Connect2020 Lincoln MKX2020 Lincoln MKZ2019 Ford Ecosport2019 Ford Edge2019 Ford Escape2019 Ford Explorer2019 Ford F-1502019 Ford F-2502019 Ford F-350+ 131 moreAssociated Documents - February 28, 2020•Document ID: 10171962Service Bulletin/Repair InstructionsEQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- SSM 48598
- Date Added:
- March 3, 2020
- Manufacturer:
- LINCOLN
Summary2013-2018 C-Max, 2013-2020 Fusion Hybrid/MKZ Hybrid vehicles may exhibit a MIL with Diagnostic Trouble Code (DTC) P0340 and/or P0344. This may occur due to excessive moisture build up in the engine oil. Excess moisture occurs when the vehicle is driven short distances and/or less than 6,000 combined miles per year. To correct the condition, replace the camshaft position sensor (CMP) and change the engine oil. Advise the customer to perform more frequent oil changes and allow the internal combustion engine to reach operating temperature when running to prevent reoccurrence. Refer to the owners guide - maintenance - engine oil check - operating in cold climates and short driving cycles.
Associated Products (18)Associated Documents - January 10, 2020•Document ID: 10170901Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- TSB 19-2391
- Date Added:
- February 3, 2020
- Manufacturer:
- FORD
SummarySome 2013-2016 Fusion, MKZ and C-MAX vehicles equipped with an HF35 transmission and built on or before 15-Aug-2015 may exhibit a thumping/rubbing or grinding noise coming from the transmission. The noise may be present in all gear ranges including neutral when the vehicle is moving but will not be present when the vehicle is stationary or in park. This may be due to the differential side bearings and/or the transfer shaft and housing. To correct the condition, follow the Service Procedure to install either a transfer shaft kit or a remanufactured transmission assembly.
Associated Products (12)Associated Documents - December 20, 2019•Document ID: 10169986Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- SSM 48423
- Date Added:
- January 8, 2020
- Manufacturer:
- FORD
SummarySome 2015-2020 Ford and Lincoln vehicles may exhibit an illuminated MIL with diagnostic trouble codes (DTCs) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021, P0022, P0024 and/or P0025. This may be due to small debris causing the VCT solenoid to stick. Before attempting any component diagnosis or replacement of the VCT solenoid, refer to Powertrain Control and Emissions Diagnosis (PC/ED) pinpoint test HK11 to cycle the affected VCT solenoid 10 times to attempt to clear the debris. For claiming, use causal part 6M280 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Associated Products (103)2020 Ford Ecosport2020 Ford Edge2020 Ford F-1502020 Ford Fusion2020 Ford Mustang2020 Ford Transit Connect2020 Lincoln MKX2020 Lincoln MKZ2019 Ford Ecosport2019 Ford Edge2019 Ford Escape2019 Ford Explorer2019 Ford F-1502019 Ford Fiesta2019 Ford Flex2019 Ford Fusion2019 Ford Mustang2019 Ford Taurus2019 Ford Transit2019 Ford Transit Connect+ 83 moreAssociated Documents - November 21, 2019•Document ID: 10168810Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 48340
- Date Added:
- December 5, 2019
- Manufacturer:
- FORD
SummarySome 2016-2019 vehicles equipped with SYNC 3 may experience a map displayed on the left half of the SYNC screen with no other information/soft buttons present after updating to the latest version of V3.0 software. This issue occurs when the SYNC 3 system has been previously modified using an aftermarket device to display the Ford GT welcome screen/HMI Theme. To correct this issue, please contact the Technical Hotline Assistance Center to have the vehicle restored back to its original state.
Associated Products (76)2019 Ford Ecosport2019 Ford Escape2019 Ford Explorer2019 Ford F-2502019 Ford F-3502019 Ford F-4502019 Ford F-5502019 Ford Flex2019 Ford Taurus2019 Ford Transit2019 Lincoln MKC2019 Lincoln MKT2018 Ford C-Max2018 Ford Ecosport2018 Ford Edge2018 Ford Escape2018 Ford Explorer2018 Ford F-1502018 Ford F-2502018 Ford F-350+ 56 moreAssociated Documents - November 1, 2019•Document ID: 10168790Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; POWER TRAIN
- Mfr Comm. #:
- SSM 48301
- Date Added:
- December 5, 2019
- Manufacturer:
- FORD
SummarySome 20132017 C-MAX Energi, 20172018 C-MAX Hybrid, 20132020 Fusion Energi and 2017-2020 Fusion/MKZ Hybrid vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with any of the following diagnostic trouble codes (DTCs): P0496, P1450, P04ED, P04EF, P04EE, P2450, P2451. When performing pinpoint test (PPT) HX in the Powertrain Controls and Emission Diagnosis (PC/ED) Manual for the referenced DTCs, incorrect results may be obtained due to an internal powertrain control module (PCM) software conflict. In order to make sure the PPT provides accurate results, immediately prior to step HX22, make sure the fuel door is fully latched and then press the fuel door release button. Keep the door open while completing HX22, then fully latch again, prior to continuing the remainder of testing
Associated Products (14)Associated Documents - August 9, 2019•Document ID: 10164508Service Bulletin/Repair InstructionsVISIBILITY:GLASS, SIDE/REAR; VISIBILITY
- Mfr Comm. #:
- SSM 48130
- Date Added:
- September 6, 2019
- Manufacturer:
- FORD
SummarySome 2010-2020 vehicles may exhibit distorted glass with a subtle orange peel pattern or streaking etched into the surface. This is caused by hydrofluoric acid which is used in some car wash solutions as a cleaning agent. Hydrofluoric acid can attack the glass and cause visual distortion and/or discoloration on the outer surface which cannot be removed by further cleaning. If this type of distortion is found, inspect the area of the glass that is covered by the cowl and/or molding. The portion of glass that is covered by the cowl or molding will not be affected by the acid. Hydrofluoric acid damage is not a defect in material or workmanship and is not a warrantable condition.
Associated Products (223)2020 Ford Expedition2020 Ford Explorer2020 Ford F-1502020 Ford F-4502020 Ford F-5502019 Ford E-3502019 Ford Ecosport2019 Ford Edge2019 Ford Escape2019 Ford Explorer2019 Ford F-1502019 Ford F-2502019 Ford F-3502019 Ford F-4502019 Ford F-5502019 Ford Fiesta2019 Ford Flex2019 Ford Fusion2019 Ford Mustang2019 Ford Taurus+ 203 moreAssociated Documents - August 7, 2019•Document ID: 10164497Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 48123
- Date Added:
- September 6, 2019
- Manufacturer:
- FORD
SummaryFor Ford and Lincoln vehicles that require positive or negative battery terminal replacement, it is not necessary to replace the complete battery cable harness (14300 and 14301) for this concern. Positive battery cable clamp BT4Z-14450-AA and negative battery cable clamp BT4Z-14450-BA are available for this type of repair. Do not cut or shorten the battery cable, instead carefully remove the affected battery cable clamp and clean the cable end as necessary to preserve wire length. Some rework may be necessary for some vehicle environments. Bend the new positive battery cable clamp as needed and crimp it to the existing battery cable. Make sure to use heat shrink tubing over the battery cable to battery cable clamp connection. Obtain the heat shrink tube locally.
Associated Products (196)2019 Ford E-3502019 Ford Edge2019 Ford Escape2019 Ford Explorer2019 Ford F-1502019 Ford F-2502019 Ford F-3502019 Ford F-4502019 Ford F-5502019 Ford F-6502019 Ford F-7502019 Ford Flex2019 Ford Fusion2019 Ford Mustang2019 Ford Taurus2019 Ford Transit Connect2019 Lincoln Continental2019 Lincoln MKC2019 Lincoln MKT2019 Lincoln MKZ+ 176 moreAssociated Documents - June 28, 2019•Document ID: 10162068Service Bulletin/Repair InstructionsPOWER TRAIN; ENGINE AND ENGINE COOLING
- Mfr Comm. #:
- TSB 19-2207
- Date Added:
- July 3, 2019
- Manufacturer:
- FORD
SummarySome 2013-2017 C-Max/Fusion/MKZ Hybrid/Energi vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P1450, P0456, P0457, P04EE and/or P04EF. This may be due to the sealing capability of the canister purge valve. To correct the condition, follow the Service Procedure steps to update the PCM software and replace the canister purge valve.
Associated Products (15)Associated Documents - June 24, 2019•Document ID: 10162087Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 48053
- Date Added:
- July 8, 2019
- Manufacturer:
- FORD
SummarySome 2016-2019 Ford and Lincoln vehicles equipped with SYNC 3 not at the latest software level may exhibit Various Performance Related concerns such as Display Operation, Navigation, Voice Recognition, Phone Pairing, Applink, Travel Link, Slow System Response, etc. Check for SYNC software update under the OASIS Tab SYNC selection. If an update is available refer to WSM,Section 415-00 and update the APIM software. After Installation, complete pop-up appears, remove USB flash drive and install into IDS tool to update Ford database. Perform a complete ignition cycle by turning the key off for 5 minutes which is critical for a successful installation. If no updates are available or a blue or black screen is present after an update refer to WSM, Section 415-00 for diagnosis or SYNC 3 intermittent blank screen GSB for tips. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the SLTS manual. Section
Associated Products (80)2019 Ford Ecosport2019 Ford Escape2019 Ford Explorer2019 Ford F-2502019 Ford F-3502019 Ford F-4502019 Ford F-5502019 Ford Flex2019 Ford Taurus2019 Ford Transit2019 Lincoln MKC2019 Lincoln MKT2018 Ford C-Max2018 Ford Ecosport2018 Ford Edge2018 Ford Escape2018 Ford Explorer2018 Ford F-1502018 Ford F-2502018 Ford F-350+ 60 moreAssociated Documents - May 24, 2019•Document ID: 10160812Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
- Mfr Comm. #:
- TSB19-2158
- Date Added:
- June 5, 2019
- Manufacturer:
- FORD
SummarySome 2017-2019 Fusion Hybrid/Fusion Energi/MKZ Hybrid and 2017-2018 C-Max vehicles built on or before 27-Jan-2019 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P013A stored in the powertrain control module (PCM). This may be due to downstream oxygen sensor parameters in the PCM software. To correct the condition, follow the Service Procedure to update the PCM software.
Associated Products (8)Associated Documents - May 10, 2019•Document ID: 10160931Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- SSM 47976
- Date Added:
- June 7, 2019
- Manufacturer:
- FORD
SummaryOn vehicles equipped with an automatic transmission it is imperative that the converter pilot hub be greased with Motorcraft Multi-Purpose Grease Spray XL-5-A even if grease was not applied from the factory. Also verify that the engine/transmission alignment dowel pins are present as well as the engine crankshaft dowel pin, if equipped, when installing the transmission. Failure to adequately lubricate the converter hub greatly increases the likelihood of the flexplate cracking in the future. Missing dowels may cause a misalignment issue also resulting in a premature failure. Refer to Workshop Manual (WSM), Section 307-01.
Associated Products (272)2019 Ford E-3502019 Ford Ecosport2019 Ford Edge2019 Ford Escape2019 Ford Explorer2019 Ford F-1502019 Ford F-2502019 Ford F-3502019 Ford F-4502019 Ford F-5502019 Ford F-6502019 Ford F-7502019 Ford Fiesta2019 Ford Flex2019 Ford Fusion2019 Ford Mustang2019 Ford Taurus2019 Ford Transit2019 Ford Transit Connect2019 Lincoln Continental+ 252 moreAssociated Documents - April 26, 2019•Document ID: 10159489Service Bulletin/Repair InstructionsEQUIPMENT:APPLIANCE:AIR CONDITIONER; ELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 47850
- Date Added:
- May 7, 2019
- Manufacturer:
- FORD
SummarySome 2013-2019 vehicles equipped with a EVDC air conditioning (A/C) compressor may exhibit poor A/C performance/improper climate function and/or a diagnostic trouble code (DTC) P06A0 in the powertrain control module (PCM). To support the proper diagnosis of this compressor, the EVDC control valve tester has been developed and is available from Rotunda (339-EVDC100). A tester has been provided to each U.S. dealership free of charge with shipments completed 19-Apr-2019 (reference EFC07013 on FMCDealer.com). This tester will help reduce the potential for misdiagnosis and unnecessary compressor replacement. Make sure that this tester is used for warranty repairs and document the test results in the Technician Comments field. Refer to the Rotunda catalog for a video and user manual which provide detailed operating instructions.
Associated Products (181)2019 Ford E-3502019 Ford Ecosport2019 Ford Edge2019 Ford Escape2019 Ford Explorer2019 Ford F-1502019 Ford F-2502019 Ford F-3502019 Ford F-4502019 Ford F-5502019 Ford Fiesta2019 Ford Flex2019 Ford Fusion2019 Ford Mustang2019 Ford Taurus2019 Ford Transit2019 Ford Transit Connect2019 Lincoln Continental2019 Lincoln MKC2019 Lincoln MKT+ 161 moreAssociated Documents - March 18, 2019•Document ID: 10156594Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 47875
- Date Added:
- April 3, 2019
- Manufacturer:
- FORD
SummarySome 2014-2019 Escape, 2014-2018 C-MAX, Focus, and Transit Connect vehicles not equipped with an auto start/stop system may exhibit an inability to program and/or no electrical power after installation of a service part body control module (BCM). Inspect the BCM for the presence of fuse F88. If fuse 88 is missing, install a 25 amp fuse and then re-evaluate the concern. If fuse 88 is installed in a vehicle with an auto start/stop system, the vehicle may exhibit concerns where the radio is turning off during an auto start/stop event and the instrument panel cluster (IPC) back lighting slowly goes dim during auto start/stop events.
Associated Products (21)2019 Ford Escape2018 Ford C-Max2018 Ford Escape2018 Ford Focus2018 Ford Transit Connect2017 Ford C-Max2017 Ford Escape2017 Ford Focus2017 Ford Transit Connect2016 Ford C-Max2016 Ford Escape2016 Ford Focus2016 Ford Transit Connect2015 Ford C-Max2015 Ford Escape2015 Ford Focus2015 Ford Transit Connect2014 Ford C-Max2014 Ford Escape2014 Ford Focus+ 1 moreAssociated Documents - March 6, 2019•Document ID: 10156508Service Bulletin/Repair InstructionsPOWER TRAIN
- Mfr Comm. #:
- TSB 19-2065
- Date Added:
- April 4, 2019
- Manufacturer:
- FORD
SummarySome 2017 Fusion Hybrid/Fusion Energi/MKZ Hybrid/C-Max and 2019 Fusion Hybrid/MKZ Hybrid vehicles built on or before 27-Jan-2019 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P013A stored in the powertrain control module (PCM). This may be due to downstream oxygen sensor parameters in the PCM software. To resolve the condition, update the PCM software.
Associated Products (4)Associated Documents - February 6, 2019•Document ID: 10156874Service Bulletin/Repair InstructionsELECTRICAL SYSTEM; ENGINE
- Mfr Comm. #:
- SSM 47790
- Date Added:
- April 8, 2019
- Manufacturer:
- LINCOLN
SummarySome 2013-2019 Fusion/MKZ and 2013-2018 C-Max vehicles with 2.0L HEV/PHEV engine may exhibit multiple drivability or electrical concerns with one or more diagnostic trouble codes, being the most common P26C3, P26CA, P26D0, P2800, P2802, U019F and U0284. On Fusion/MKZ inspect connectors C146, C1651, C1812, C168C, C1717 and C134 for signs of water entry or corrosion. On C-Max, inspect connectors C134, C140, C144, C1651, C1717 and C1812 and service as necessary. NOTE: Connector C1717 is only equipped on PHEVs for both Fusion and C-Max.
Associated Products (20)2019 Ford Fusion2019 Lincoln MKZ2018 Ford C-Max2018 Ford Fusion2018 Lincoln MKZ2017 Ford C-Max2017 Ford Fusion2017 Lincoln MKZ2016 Ford C-Max2016 Ford Fusion2016 Lincoln MKZ2015 Ford C-Max2015 Ford Fusion2015 Lincoln MKZ2014 Ford C-Max2014 Ford Fusion2014 Lincoln MKZ2013 Ford C-Max2013 Ford Fusion2013 Lincoln MKZAssociated Documents - February 6, 2019•Document ID: 10155562Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 47790
- Date Added:
- April 1, 2019
- Manufacturer:
- FORD
SummarySome 2013-2019 Fusion/MKZ and 2013-2018 C-Max vehicles with 2.0L HEV/PHEV engine may exhibit multiple drivability or electrical concerns with one or more diagnostic trouble codes, being the most common P26C3, P26CA, P26D0, P2800, P2802, U019F and U0284. On Fusion/MKZ inspect connectors C146, C1651, C1812, C168C, C1717 and C134 for signs of water entry or corrosion. On C-Max, inspect connectors C134, C140, C144, C1651, C1717 and C1812 and service as necessary. NOTE: Connector C1717 is only equipped on PHEVs for both Fusion and C-Max.
Associated Products (20)2019 Ford Fusion2019 Lincoln MKZ2018 Ford C-Max2018 Ford Fusion2018 Lincoln MKZ2017 Ford C-Max2017 Ford Fusion2017 Lincoln MKZ2016 Ford C-Max2016 Ford Fusion2016 Lincoln MKZ2015 Ford C-Max2015 Ford Fusion2015 Lincoln MKZ2014 Ford C-Max2014 Ford Fusion2014 Lincoln MKZ2013 Ford C-Max2013 Ford Fusion2013 Lincoln MKZAssociated Documents - January 24, 2019•Document ID: 10153975Service Bulletin/Repair InstructionsFUEL SYSTEM, GASOLINE
- Mfr Comm. #:
- SSM 47765
- Date Added:
- March 4, 2019
- Manufacturer:
- FORD
SummarySome 2013-2018 C-MAX, 2013-2019 Fusion Energi, and 2017-2019 Fusion/MKZ Hybrid vehicles may exhibit an illuminated MIL with diagnostic trouble code (DTC) P04B5. This may be due to inadvertent actuation of the fuel door release button by the customer when exiting the vehicle. If the fuel filler door is not fully closed after a refueling event or the fuel filler door is open from erroneously pressing the fuel door release button, a message displays during the third drive cycle to indicate the fuel filler door is not closed and the DTC sets. Before performing Workshop Manual (WSM) diagnosis, consult the customer about the potential for accidental fuel door actuation and explain the need to fully latch the fuel door after every refueling event. Malfunction Indicator Lamp will turn off after (3) drive cycles with fuel filler door closed.
Associated Products (15)Associated Documents - January 17, 2019•Document ID: 10153969Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- SSM 47749
- Date Added:
- March 4, 2019
- Manufacturer:
- LINCOLN
SummarySome 2012-2019 Vehicles may require repairs to the Smartlink system. Smartlink is a Ford Licensed Accessory which has a warranty provided by the accessory manufacturer. Warranty replacement parts for Smartlink that are ordered through Ford are not reimbursable through the Ford Motor Company warranty system. Please see the Warranty and Policy Manual for further information on Ford Licensed Accessories.
Associated Products (142)2019 Ford Ecosport2019 Ford Edge2019 Ford Escape2019 Ford Explorer2019 Ford F-1502019 Ford Fiesta2019 Ford Flex2019 Ford Fusion2019 Ford Mustang2019 Ford Taurus2019 Ford Transit2019 Ford Transit Connect2019 Lincoln Continental2019 Lincoln MKC2019 Lincoln MKT2019 Lincoln MKX2019 Lincoln MKZ2018 Ford C-Max2018 Ford Ecosport2018 Ford Edge+ 122 moreAssociated Documents - January 17, 2019•Document ID: 10153968Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- SSM 47748
- Date Added:
- March 4, 2019
- Manufacturer:
- FORD
SummarySome 2016-2019 Escape and 2016-2018 Focus/C-Max vehicles may exhibit a customer perceived concern of a FDIM screen flicker during transitions between day/night mode and/or during auto headlamp on/off. The FDIM utilizes a ramp up and ramp down strategy of controlling the back lighting when the display setting is in auto dimming mode. This is a normal condition that does not affect the function or durability of the FDIM. Auto dimming mode can be turned off to minimize the ramp up and ramp down lighting strategy. To turn off the auto dimming mode feature in the FDIM display: select> FDIM settings> Display settings> Auto Dim selection. Do not confuse the auto dimming mode selection with the selection for auto day/night operation. Turning off auto dimming mode only effects the back lighting strategy and does not affect any other function or FDIM reliability.
Associated Products (10)Associated Documents