BMW M760i Service Bulletins (2018)
210 manufacturer communications on file.
- January 1, 2020•Document ID: 10171503Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B840220
- Date Added:
- February 18, 2020
- Manufacturer:
- BMW
SummaryREMOTE 3D VIEW NOT AVAILABLE: Remote 3D View cannot be launched In the BMW ConnectedDrive App. Software error in the Advanced Telematics Module 2 (ATM2).
Associated Products (68)Associated Documents - January 1, 2020•Document ID: 10171502Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B840120
- Date Added:
- February 18, 2020
- Manufacturer:
- BMW
SummaryBMW CONNECTEDDRIVE SERVICES ARE NOT AVAILABLE: The BMW ConnectedDrive services are not available for an extended period. This may include: Calls in the BMW Assistance app (Concierge Service) Vehicle data and status in the BMW ConnectedDrive app Remote services Remote 3D View Real Time Traffic Information (RTTI) Weather News Software error in Advanced Telematics Module 2 (ATM2).
Associated Products (68)Associated Documents - January 1, 2020•Document ID: 10171499Service Bulletin/Repair InstructionsEQUIPMENT
- Mfr Comm. #:
- B662017
- Date Added:
- February 18, 2020
- Manufacturer:
- BMW
SummaryDISPLAY KEY IS NON-FUNCTIONAL: This Service Information Bulletin (Revision 3) replaces SI B66 20 17 dated October 2019. The display key is non-functional. Display Key cannot be charged or switched on. An incorrect vehicle model appears on the key display. Possible defective display key battery or display key.
Associated Products (51)Associated Documents - January 1, 2020•Document ID: 10171498Service Bulletin/Repair InstructionsBACK OVER PREVENTION; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- B660817
- Date Added:
- February 18, 2020
- Manufacturer:
- BMW
SummaryREAR VIEW CAMERA FAILS TO DISPLAY IMAGE: This Service Information Bulletin (Revision 5) replaces SI B66 08 17 dated March 2018. Sporadically when the rear view camera is activated no image appears in the display. The rear view camera can be activated by either: 1. Selecting reverse with the shift selector 2. Camera activation via the button on the center console Camera function returns after a terminal change. Note: This error situation can rarely if ever be duplicated on demand. Head-unit interface software start-up synchronization error for the rear view camera.
Associated Products (54)Associated Documents - January 1, 2020•Document ID: 10171496Service Bulletin/Repair InstructionsELECTRICAL SYSTEM:SOFTWARE; AIR BAGS
- Mfr Comm. #:
- B650520
- Date Added:
- February 18, 2020
- Manufacturer:
- BMW
SummaryFAULT 930C1E IS FOUND IN THE ACSM: Vehicle comes into the workshop with the following illuminated: Check Engine Light DSC warning lamp Air bag warning lamps During diagnosis the following fault code is found stored in the ASCM (Advanced Crash Safety Module): 930C1E internal ECU error If the fault is cleared it returns immediately. The root cause is under investigation.
Associated Products (45)Associated Documents - January 1, 2020•Document ID: 10171484Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM:SOFTWARE
- Mfr Comm. #:
- B121818
- Date Added:
- February 18, 2020
- Manufacturer:
- BMW
SummaryDME FC 20E120 IS STORED AND THE MIL IS ILLUMINATED: This Service Information Bulletin (Revision 2) replaces SI B12 18 18 dated July 2018. The Malfunction Indicator Lamp (MIL) is illuminated and the following fault code is stored in the Digital Motor Electronics (DME). 20E120 - Crankcase ventilation ventilation hose: not connected/defect A software error in the Digital Motor Electronics (DME).
Associated Products (23)Associated Documents - January 1, 2020•Document ID: 10171483Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- B120419
- Date Added:
- February 18, 2020
- Manufacturer:
- BMW
SummaryDME FAULT MEMORY ENTRY FOR THE CRANKSHAFT SENSOR: This Service Information Bulletin (Revision 1) replaces SI B12 04 19 dated February 2019. Technicians may notice this fault logged during a diagnostic session: Fault code: Control module: Fault Text: 160021 DME Crankshaft sensor: general loss of synchronism Environmental conditions are vehicle speed 0 (stationary) and engine speed less than 1500 rpm. There is no customer-facing symptom nor related check control message displayed. Phantom/pseudo fault due to unsuitable DME software. Background: After parking the vehicle and turning off the engine both DME control units go into sleep mode at different times. The DME of cylinder bank 2 ("secondary") goes into sleep mode first The DME of cylinder bank 1 ("primary") is still awake and can experience a reduction in signal voltage for the crankshaft sensor signal This signal change can mistakenly be evaluated as a skipped crankshaft sensor cog by the DME. If the engine is started while the primary DME is still awake this causes a brief loss of synchronization with the secondary DME. Fault 160021 is logged after three (3) consecutive engine starts with this momentary loss of synchronization. Note: Starting the engine after the primary DME has also gone into sleep mode will avoid the loss of synchronization.
Associated Products (53)Associated Documents - January 1, 2020•Document ID: 10171479Service Bulletin/Repair InstructionsENGINE AND ENGINE COOLING
- Mfr Comm. #:
- B111219
- Date Added:
- February 18, 2020
- Manufacturer:
- BMW
SummaryMALFUNCTION INDICATOR LAMP IS ILLUMINATED WITH A CRANKSHAFT ADAPTION FAULT: When diagnosing an illuminated malfunction indicator lamp (MIL) and/or a different issue the following faults may also be stored in the Digital Motor Electronics (DME). Fault code Control module Fault code text 213A2B DME Increment wheel adaption faulty This situation is not associated with any drivability complaints and only affects vehicles built with a Factory I-level of 19-07-500 and later. An unfavorable DME diagnostic calibration may cause the fault code to be stored. In most circumstances this will cause the MIL to be illuminated.
Associated Products (75)Associated Documents - January 1, 2020•Document ID: 10171414Service Bulletin/Repair InstructionsAIR BAGS
- Mfr Comm. #:
- B011319
- Date Added:
- February 18, 2020
- Manufacturer:
- BMW
SummarySIDE PANEL REAR LIGHT HOUSINGS: LTD WTY EXT TO 10 YEARS WITHOUT MILEAGE LIMIT: The rear light housing(s) can loosen/detach at the mounting tabs this can cause a clacking sound in the rear of the vehicle while driving. The plastic mounting tabs for the rear tail light assembly housing(s) may become too brittle and crack to the point where the hold down nut(s) can no longer keep the housing(s) in place.
Associated Products (95)Associated Documents - December 1, 2019•Document ID: 10170572Service Bulletin/Repair InstructionsELECTRICAL SYSTEM
- Mfr Comm. #:
- B120319
- Date Added:
- January 21, 2020
- Manufacturer:
- BMW
SummaryENGINE DOES NOT START BELOW FREEZING TEMPERATURES: Engine designation correction Parts availability Warranty. The engine will not start at temperatures below freezing. The starter does not turn and engage.
Associated Products (118)Associated Documents